Click image to view full size image
Compact Stainless Steel Level Transducer Mpm436W
Features:
1. Stainless steel
2. Compact
3. Full sealed
4. IP68
5. Water-proof connection box
6. Submersible
Application:
1. Petroleum
2. Chemical
3. Urban water supply
4. Hydrology
5. Liquid level
Specification:
MPM436W only can be 2-wire transmitting; power supply 12~30VDC, load<(U-12)/0.02A-Rwire(kΩ); U is power supply valrage, Rwire is wire resistance.
Order Guide
Features:
1. Stainless steel
2. Compact
3. Full sealed
4. IP68
5. Water-proof connection box
6. Submersible
Application:
1. Petroleum
2. Chemical
3. Urban water supply
4. Hydrology
5. Liquid level
Specification:
| Pressure range | MPM436W | 0.5 1 2mH2O | ||||
| Overpressure | 1.5 times FS (MPM436W: 10 times FS) | |||||
| Accuracy | MPM436W | +0.5%FS(min.) +1.0%FS(max.) | ||||
| Stability error | MPM436W | +5mmH2O(typ.) | ||||
| Temp. drift | MPM436W | ≤±0.15%FS/10ºC(-20ºC~+70ºC) | ||||
| ≤±0.2%FS/10ºC(-30ºC~-20ºC) | ||||||
| Transmitting | 2-wire | 3-wire | 3-wire | |||
| Power supply | 15~30VDC(Intrinsic safe version is supplied through safe barrier) | 15~28VDC | 15~28VDC | |||
| Output signal | 4~20mADC | 0~10/20mADC | 0/1~5/10VDC | |||
| Load (Ω) | <(U-15)/0.02A* | <(U-15)/0.02A | >5k | |||
| Material contacting with media | Housing: SS lCr18Ni9Ti | Seal parts: Viton | ||||
| Rubber casing: NBR | Cable: Φ7.5mm PVC/Polyurethane cable with vented tube | |||||
| Diaphragm: SS 316L(MPM426W);96% alumina ceramic(MPM436W) | ||||||
| Operation temp. | MPM436W -30ºC~+70ºC; | |||||
| Storage temp. | -30ºC~85ºC | |||||
| Protection | IP68 (sensor part); IP65 (connection box) | |||||
| Ex-proof class | ExiaIICT6 | |||||
MPM436W only can be 2-wire transmitting; power supply 12~30VDC, load<(U-12)/0.02A-Rwire(kΩ); U is power supply valrage, Rwire is wire resistance.
Order Guide
| MPM426W/436W | Submersible Level Transmitter | ||||||||||||
| Range (mH2O) | [0~XmH2O]L L: cable length; suggested L-X=(1~2)m | ||||||||||||
| code | Output signal | ||||||||||||
| E | 4~20mADC | ||||||||||||
| F | 1~5VDC | ||||||||||||
| J | 0~5VDC | ||||||||||||
| Q | 0~10mADC | ||||||||||||
| U | 0~20mADC | ||||||||||||
| V | 0~10VDC | ||||||||||||
| Code | Construction material | ||||||||||||
| Diaphragm | Pressure port | Housing | Only for MPM426W | ||||||||||
| 22 | SS 316L | SS | SS | ||||||||||
| 24 | SS 316L | SS 316L | SS 316L | ||||||||||
| 25 | Tantalum | SS | SS | ||||||||||
| Code | Others | ||||||||||||
| M1 | 0~100% hand pointer indicator | ||||||||||||
| Ya | Aluminum connection box with display | ||||||||||||
| Yb | Aluminum connection box without display | ||||||||||||
| Yc | MS200 water-proof connection box(default) | ||||||||||||
| Yd | PD140 lightening-proof protection device | ||||||||||||
| i | Intrinsic safe version ExiaIICT6 | ||||||||||||
| C1 | M20×1.5 male, face type seal | Only for MPM426W | |||||||||||
| C3 | G1/2 male | ||||||||||||
| C5 | M20×1.5 male, waterline seal | ||||||||||||
| T | Ship-use | ||||||||||||
| F1 | Fixed flange | ||||||||||||
| MPM426W [0~3mH2O]5 E 22 YiC1 the whole spec | |||||||||||||